Blog

Quantity of 4 white plastic printhead cable clips, used to secure the printhead cable to the bowden tube. Official Ultimaker spare part. Two plastic spacers for use on the X-motor and Y-motor on your printer. Not compatible with the Ultimaker 3 Extended.

This is the filament guide assembly that sits on the back of the reel holder to prevent filament from tangling. This part is the white cable that runs from the heated bed to the main electronics board on the Ultimaker 3 series printers and is responsible for heating the bed.

Official Ultimaker spare part, compatible with the following machines: Ultimaker Uhu brand glue stick. This is a replacement metal bracket with capacitive sensor board and capacitive sensor cable for Ultimaker 3 and Ultimaker 3 Extended printers. This part uses an updated design with a metal bracket, nozzle seal, and metal nozzle seal adapter. The following parts make up the lifting switch mechanism on the printhead. Compatible with the following printers: Ultimaker 3 Ultimaker 3 Extended.

Red wifi board that fits into the red Olimex electronics board on the Ultimaker 3 and Ultimaker 3 Extended. Official Ultimaker spare part compatible with the following printers: Ultimaker 3 Ultimaker 3 Extended. The printhead PCB board on the Ultimaker 3 and Ultimaker 3 Extended provides the contact point for your Print Cores, fans, and capacitive sensor to send information down print head cable to your Ultimain electronics board.

Official Ultimaker 3 part compatible with: Ultimaker 3 Ultimaker 3 Extended Four DIN M2. This is the USB Ulticontroller. This is an official spare part for the Ultimaker 3 and Ultimaker 3 Extended. An official Ultimaker Spare Part, sold per motor. A radial fan 5V for use as the side fans on the Ultimaker 3 series printers for print cooling. A pair of strong Bowden tube collets and blue retaining clips compatible with all Ultimaker series of machines. These collets have thick teeth to provide additional grip on the bowden tube for the most reliable printing experience.

When installed in All the parts for every models of Ultimaker are available here in order to modify or repair your machine. The spare parts are directly from manufacturer. Need help? Ask our expert team for guides and how to.

The kit contains all the items necessary to maintain your machine in a single solution. The kit includes spare parts and various types of mechanical grease. Installation is simple and only takes an hour thanks to the demo video.

Your prints will be better-quality and easier to make. Its function is to read the temperature in the nozzle Hot End. This glass plate is only compatible with the Ultimaker 2 Go. It helps support printed objects and diffuses heat from the heating plate. Sold as a spare part. Brass nozzle, 0. When changing the nozzle, it is recommended that you do it hot. Nozzle sold individually. They help filter the air and particles VOCs potentially released during printing. Sold in packs of 2.

Stainless steel nozzle, 0. Our goal is that all orders placed before are shipped out from us the same day if the products are in stock. You choose method in the checkout. Delivery time will be around 2 – 6 days to most European countries.

Worldwide delivery around 4 – 7 days. You will receive and mail from us with the tracking nr of the parcel as soon as we have shipped your order. All orders placed before are shipped out from us the same day if the products are in stock. This item cant be delivered in the selected country.

Please change the country. Our website uses cookies. Some of them are essential, others help us improve this website and your user experience. You can find further information about our use of cookies and your rights as a user in our Privacy policy and our Legal disclosure.

VAT excl.

Ultimaker 3 feeder parts free – http://replace.me

Notify me when this product is available. Official Ultimaker Spare Parts. Glass print bed approximately 9″ x 10″. A genuine ‘AA’ style Ultimaker 3 print core with a 0. Compatible with the following Ultimaker printers: Ultimaker 3 Ultimaker These are the short belts that connect the x and y motors to the axes. Axial fan 5V for use in the front bracket of the Ultimaker 3 series and Ultimaker S-line printers, for hot end cooling.

Using the Ultimaker cleaning filament is the most effective way to unclog and keep print cores and nozzles in optimal condition. When to use the Ultimaker cleaning filament The Ultimaker cleaning filament is used for both print core maintenance and The silicone nozzle seal on the Ultimaker S5 and Ultimaker S3 fits on the underside of the printhead to help keep the temperature stable and prevent back-flow of filament. Sold as a set of 5 pieces. Official Ultimaker S5 and Ultimaker S This is the print head assembly for the Ultimaker S3 and Ultimaker S5.

It includes all pictured parts here, including the printhead cable, PCB, fans, nozzle seal, collets, and clamp clips. Note: If you have the original version of the Note: If you have the original version of the S5 featuring the Ultibot logo on the side panels , we recommend Official spare part for the Ultimaker S5.

Contains Ultimaker S5 bowden tube, 2 collets, and 2 clamp clips. Compatible with the Ultimaker S5 only; not compatible with Ultimaker 2 series, Ultimaker 3 series, or S3 printers. A pair of strong Bowden tube collets and blue retaining clips compatible with all Ultimaker series of machines.

These collets have thick teeth to provide additional grip on the bowden tube for the most reliable printing experience. When installed in Replacement metal bracket with capacitive sensor board and capacitive sensor cable for Ultimaker S5 and Ultimaker S3 printers.

Light machine oil like sewing machine oil should be applied regularly to all of the smooth axis rods on your printer to keep everything in smooth operation. A pair of the spring clips for holding the glass in place. These clips can be used on all 4 corners of the bed, or on the back two corners as preferred. These are official Ultimaker spare parts, compatible with the following Thick green machine grease used for lubricating the trapezoidal lead screw on your printer and ensuring smooth movements on the Z-axis.

This is a set of fully assembled sliding blocks on Ultimaker S5 belts. This part is compatible only with the Ultimaker S5. Installation instructions are available here. When replacing this part, you may also want to replace your short belts as well. A genuine ‘AA’ style Ultimaker print core with a 0.

A radial fan 5V for use as the side fans on the Ultimaker 3 series printers for print cooling. Safety glass clips, one each for the left and right front corners of the bed plate. The printhead PCB board on the Ultimaker S5 and Ultimaker S3 provides the contact point for your Print Cores, fans, and capacitive sensor to send information down print head cable to your electronics board. Official Ultimaker spare part. The following parts make up the lifting switch mechanism on the printhead.

Quantity of 4 white plastic printhead cable clips, used to secure the printhead cable to the bowden tube. Uhu brand glue stick. The 8mm single pulley, assembled with a set screw, is used on all Ultimaker 2 series, Ultimaker 3 series, and Ultimaker S-Line printers.

Filters should be replaced after approximately hours of runtime. The 5mm pulley, assembled with a set screw, is used on all Ultimaker 2 series, Ultimaker 3 series, and Ultimaker S-Line printers.

Four DIN M2. This metal ring sits at the bottom of your Ultimaker S series feeder, preventing wear and tear to the feeder housing. This is the filament guide assembly that sits on the back of the reel holder to prevent filament from tangling. The S5 Maintenance Kit by fbrc8 offers everything you’ll want to keep on hand for keeping your printer running in top shape, all year long. Self-adhesive sheets for the print bed to improve the adhesion of some materials.

Pack contains 25 sheets. These sheets are sized for the Ultimaker S5 printer. This new print core contains a highly wear-resistant hardened steel nozzle and titanium heat break, making them more reliable, robust, and This is a set of fully assembled sliding blocks on Ultimaker S3 belts.

This part is compatible only with the Ultimaker S3. The single pulley assembly Gear Ratio , assembled with a set screw, is used on the Ultimaker S-Line printers. The S3 Maintenance Kit by fbrc8 offers everything you’ll want to keep on hand for keeping your printer running in top shape, all year long.

The double pulley assembly Gear Ratio , assembled with a set screw, is used on the Ultimaker S-Line printers. Menu 0. Ultimaker S-Line Spare Parts. These factory direct, genuine Ultimaker spares include the most common user-serviceable parts for the Ultimaker S5 and Ultimaker S3. Add to Cart. Ultimaker AA Print Core 0. Ultimaker Cleaning Filament Sold Out. Ultimaker BB Print Core 0. Ultimaker Print Core CC.